mdt Westech Avanti 8 Compact Alarm Control Panel
Sometimes you just want a basic control panel. Nothing too fancy. A panel that is quick & easy to install and does what it says it’s going to do.
Avanti 8 is the perfect choice for such domestic installations. Familiar to wire, easy to programme and provides you with all the features you need. Avanti 8 comes pre-programmed. Programme A (Away - Full Set) means that all 8 zones are protected. Programme B (Bed - Part Set) omits Zones 7 & 8. Programme * is left un-programmed. Within both programmes Zone 1 is Entry Exit, Zone 2 is Time Inhibited and all others are Immediate. The vast majority of installations are covered by these defaults.
Avanti 8 has 8 Zones (plus PA & Tamper) and is available as an On-board panel or Remote Endstation. Up to four LED RKP’s can be connected.
Providing you with 3 Programmes, 7 access codes, on-board PA &16 Event Log, Avanti 8 is fully programmable and has value-added features such as Front Doorbell.
Top Tip: If you’d rather use a LCD or LCD/Prox (Red4Bed) RKP, you need to take a look at AvantiLC.
Specification
| 8 Zones | All fully programmable plus PA & Tamper 5 Types including Fire & Doorbell Attributes: N/O, Double Knock, Permit Omit, Chime. |
| PA | Active in day or set |
| Tamper | Full alarm if Set, local alarm in Day |
| Programs | 3 Part Set Programmes with independent entry/exit times: A (Away), B (Bed) & * |
| 7 Access Codes | Engineer, Manager, Holiday & 4 User Codes |
| PTS Input | Dedicated Push to Set/Keyswitch input |
| Event Log | 16 Event Memory Recall |
| Service Timer | Selectable Service Timer (900 closings) |
| Remote keypads | Up to 4 LED remote keypads |
| On board PA | Buttons 4 & 8 |
| Tamper | Global |
| Entry/exit timers | Programmable 0-99 seconds |
| Current consumption | CPU Standby 70mA, Alarm 200mA RKP Standby 40mA, Alarm 70mA |
| Supply | 230v 50 Hz +/- 10% |
| Dimensions | CPU – 235 x 180 x 58 mm RKP – 132 x 95 x 29mm |
| Standards | EN50131 Grade 1, Class II PD6662 Low Voltage Directive (LVD) 72/23/EEC Electro-magnetic Compatibility EMC Directive 89/336/EEC |
Compatible Products