Intellisense AG6 ActiveGuard External Sounder Screenprinted

Intellisense Activeguard AG6 ready screenprinted for that professional impression.

The Active Guard AG6 external sounder is designed to be simple to install with keyhole fixings, and offers a wide variety of features and safeguards.

Dimensions

Height:     300mm
Width:      200mm
Depth:      55mm
Weight:    840gr

Features

·            110db audio output level
·           High impact polycarbonate moulding
·          Horizontal and vertical mounting
·          Built-in 15 minute cut off timer
·          One standard built in wrap around strobe lens
·          Double skin construction
·          Nicad battery backup included
·          High visibility status LED
·          Front and rear tamper
·          Piezo sounder

Specification

Hold off supply:	13.65v dc nominal, 12 ~ 14.5v dc
Load current:	30ma  : quiescent 400ma: combined sounder and strobe 170ma: strobe only
Sound output level:	110db @ 1m nom
Battery:	6v, 280mAhr nicad.  Minimum of 3 x 15 minute alarms from fully charged battery without recharge
Operating temperature:	-20’c ~ 40’c, operating and storage
Humidity:	5% ~ 95% relative humidity, non-condensing
Trigger conditions:	Automatic reset occurs when trigger clears
Triggers:	Loss of hold off supply S- Negative trigger (-V applied) Trigger occurs when terminal voltage is less than 3.5v Maximum load 1.0mA.
Tamper detection:	Wall and cover retaining screw
Cut off timer:	15 minutes nom. (Sounder only)
Strobe trigger:	-V applied
Strobe:	0.6 joules per flash.  2 flashes per second nom. @ 13.65v dc strobe supply.
Weight:	840gr
Approvals:	The AG6 sounder complies with EN50131-1 which relates to security control equipment.