Intellisense AG6 ActiveGuard External Sounder

The Active Guard AG6 external sounder is designed to be simple to install with keyhole fixings, and offers a wide variety of features and safeguards.

Dimensions

Height:     300mm
Width:      200mm
Depth:      55mm
Weight:    840gr

Features

·            110db audio output level
·           High impact polycarbonate moulding
·          Horizontal and vertical mounting
·          Built-in 15 minute cut off timer
·          One standard built in wrap around strobe lens
·          Double skin construction
·          Nicad battery backup included
·          High visibility status LED
·          Front and rear tamper
·          Piezo sounder

Specification

Hold off supply:	13.65v dc nominal, 12 ~ 14.5v dc
Load current:	30ma  : quiescent 400ma: combined sounder and strobe 170ma: strobe only
Sound output level:	110db @ 1m nom
Battery:	6v, 280mAhr nicad.  Minimum of 3 x 15 minute alarms from fully charged battery without recharge
Operating temperature:	-20’c ~ 40’c, operating and storage
Humidity:	5% ~ 95% relative humidity, non-condensing
Trigger conditions:	Automatic reset occurs when trigger clears
Triggers:	Loss of hold off supply S- Negative trigger (-V applied) Trigger occurs when terminal voltage is less than 3.5v Maximum load 1.0mA.
Tamper detection:	Wall and cover retaining screw
Cut off timer:	15 minutes nom. (Sounder only)
Strobe trigger:	-V applied
Strobe:	0.6 joules per flash.  2 flashes per second nom. @ 13.65v dc strobe supply.
Weight:	840gr
Approvals:	The AG6 sounder complies with EN50131-1 which relates to security control equipment.