Intellisense AG8 Activeguard Bellbox

Intellisense AG8 ActiveGuard Twin Piezo Bell Box

The Activeguard AG8 bell box is designed to be simple to install with keyhole fixings, and offers a wide variety of features and safeguards.  Features include two piezo sounders and two LED’s with the option of a second strobe plus optional sounder settings plus a selectable timer.

Dimensions
Height:     300mm
Width:      200mm
Depth:      55mm
Weight:    840gr

Features

• 116db audio output level
• Horizontal and vertical mounting
• Two high visibility status LEDs
• Dual tones
• Two piezo sounders

Specification

Hold off supply:	13.65v dc nominal, 12 ~ 14.5v dc
Load current:	35ma  : quiescent 350ma: combined sounder and strobe 125ma: strobe only
Sound output level:	116db @ 1m nom
Battery:	6v, 280mAhr nicad.  Minimum of 3 x 15 minute alarms from fully charged battery without recharge
Operating temperature:	-20’c ~ 40’c, operating and storage
Humidity:	5% ~ 95% relative humidity, non-condensing
Trigger conditions:	Automatic reset occurs when trigger clears
Triggers:	Loss of hold off supply S- Negative trigger (-V applied) Trigger occurs when terminal voltage is less than 3.5v Maximum load 1.0mA.
Tamper detection:	Wall and cover retaining screw
Tamper out:	Normally closed negative tamper return
LED 1 & 2	Twin alternating LED’s also used for diagnostics
Cut off timer:	Link selectable 3 and 15 minutes nom. (Sounder only)
Strobe trigger:	-V applied
Strobe:	0.6 joules per flash.  1 flash per second nom. @ 13.65v dc strobe supply.
Weight:	840gr
Approvals:	The AG6 sounder complies with EN50131-1 which relates to security control equipment.