Mosquito PAA3 Handheld Audio Analyzer with USB Interface

  Installing a Mosquito correctly can be difficult for two reasons. Firstly the majority of installation engineers are too old to hear if the unit is functioning and secondly, the sound emitted from the unit is highly directional. This means that the installation engineer has to ensure that the sound is going where it is needed. This is not as easy as it appears.

The PAA3 Hand Held Audio Analyser can be set-up to detect the 18KHz tone emitted by the Mosquito and provide a digital readout of the dB level. This means that the engineer can move around the area where the sound is required and check that there is sufficient dB level there. It is suggested that for the Mosquito to be most effective, levels need to be in excess of 75 dB.

• Palm-sized, lightweight audio analyzer for all sound engineers
• 31-band spectrum analyzer, RT60, SPL meter, and more
• Easy operation with built-in microphone and generator
• EQ setting calculation offers advice for boosting and cutting at the touch of a button
• USB interface allows real-time computer operation
• Seven hours of continuous operation with four AA batteries

The PAA3 is a highly accurate handheld audio analyzer that gives sound engineers a rich array of sound analysis tools. Features include 31-band real time spectrum analysis, RT60, SPL and line meter, internal generator, EQ setting program, microphone calibration and speaker phase checking abilities. All functions and menus can be accessed through a central jog dial, leaving your other hand free to adjust audio settings. Easily upload information and settings to your computer via the built-in USB interface. The large LCD screen has a visible backlight to help you see in a dark performance environment. And with a battery life of 7 hours, the PAA3 is the multifunctional tool for every serious audio engineer.