Standard PIR Detector

 

The Intellisense IS215 is designed for residential and light commercial applications.  It has a smooth white housing that is designed to blend with any décor.  It has a large wiring channel for quick, neat installation and a 45’ terminal block for a clear view of the wiring platform even when the sensor is already mounted. C&K’s patented look-down mirror provides creep zone detection directly beneath the sensor.  Sensitivity can be adjusted to match the installation requirements.  It has a sealed tamper switch and increased  immunity from white light.

Dimensions
Height:     87mm
Width:      62mm
Depth:      40mm
Weight:    65.5g

Specification

Power requirements:	10 – 14v dc; 20ma @ 12v dc
Operating voltage	10 – 14v dc
Tamper switch:	Form A (Normally closed) \ 100ma @ 24v dc
Alarm relay:	Form A (Normally closed) \ 100ma @ 24v dc
Operating temperature:	0’c to 49’c
RF Immunity:	20 v/m from all mobile bands 10 – 1000mhz
White light Immunity:	2.500 lux
PIR sensitivity:	Jumper selectable – High or low
LED Enable:	Can be enabled by cutting a jumper wire
Wiring channel:	8mm wide x 6.5mm depth
Accessories:	SMB10    Universal white swivel mount bracket SMB10T Tampered universal swivel mount bracket SMB10C  Universal ceiling mount bracket
Approvals:	CE approved