Takex Standard Quad Beams (1 Channel)

 

The expert in outdoor protection 4-stacked synchronisedbeam sensor for long range use. Intelligent quad active beam detector, single frequency selectable beam strength selection, auto-gain lock, alarm memory (can be manually reset), frost proof cover, alarm output Ic format

 

Features

 

• 4-STACKED HIGH POWERED BEAM (Patent)

Double modulation frequency and phased locked loop system offers high power beams that have tenfold maximum arrival distance and a hundredfold maximum sensitivity.

• Excellent tolerance for bad weather (Fog, snow or heavyrain etc.).
• Anti-external light circuit provides excellent tolerance for sunlight, mercury light and fluorescent light.
• Since simultaneous breaking of 4 beams is required to initiate an alarm, the most common causes of false alarms (small animals, birds and falling leaves) are virtually eliminated.

 

BEAM LEVEL INDICATION FOR BEAM ALIGNMENT

• Attenuation LED lights up and informs you of low sensitivity condition when the beam attenuates under a certain level. Convenient for sensitivity check after cover attached.

• Monitor jack to check if beam level is optimal for beam alignment use.

INSECT PROTECTION

A sealed optical system prevents interference by insects.

POLE MOUNTING/WALL MOUNTING AVAILABLE 

The unit can be mounted back to back on pole and the protection line can be set at the same height (Utility model).

• Wide adjustable range of beam alignment (Horizontally ±90ºC, Vertically ±10ºC).
• Optional accessories available (Heater, housing, rear cover etc.).
• Tamper output.
• Polycarbonate cover provides excellent shock-proof.

EXCELLENT NOISE, RFI IMMUNITY

Special noise eliminator system provides excellent RFI and electrical induction noise immunity.

 

Specification
Please see the pdf download above for further more detailed information.

 

Please click here for a Takex product comparison and Takex Installation manuals