K600 Four Channel Transmitter / Fob

Burglar Intruder Alarm Systems -> Wireless Burglar Alarm Systems -> Keystone Wireless Burglar Alarms -> K600 Four Channel Transmitter / Fob

Click for larger picture

Keystone Four Channel Hand Held Transmitter / Fob

Link to keystone site

The Keystone four channel hand held transmitter / fob is designed for use with the Keystone receiver. It is normally used by engineers when installing Keystone wirless products.
With the extra channels it allows a system to be tested for arm/disarm, panic and also walk test the transmitter range to the receiver before installation, avoiding range problems.
The range of the transmitter is 30m** under normal conditions.

Dimensions

Height: 60mm
Width: 40mm
Depth: 12mm

Colour	Black
Voltage Supply	3V DC
Battery	Lithium CR2032
Current Cons Op	7mA
Current C Stand By	0µA
Coding Method	Solder Trace
Circuit	Saw Stabilized
Op Temp Range	-10 to +55C
Encoding/Decoding	10 Bit Binary
Mod Method	Pulse Burst Mod
Output Power	80µW Typical
Frequency	433.92 MHz
Code Combinations	1024
Sensitivity	N/A
No Of Channels	4 + Low Batt /Tamper
Output Type	N/A
Drive Capability	N/A

**Range The range of the detectors to the control panel will vary depending upon the building layout, construction of the building and thickness of walls. The orientation of the alarm panel and detectors can also affect the range. Find a place for the panel which is dry, as central to all transmitters as possible, as high as possible and away from sources of interference such as computers, televisions, electric motors, convection heaters, air conditioners and large metal objects that could shield the RF signal. It is recommended that, before both panel and transmitters are installed, a placement test be undertaken.