K600 Wireless PIR

Burglar Intruder Alarm Systems -> Wireless Burglar Alarm Systems -> Keystone Wireless Burglar Alarms -> K600 Wireless PIR

Click for larger picture

Keystone Wireless PIR

Link to keystone site

The Keystone wireless PIR is designed for use with the Keystone receiver, either as a addition to a hardwired system or as part of the Keystone wireless alarm kit. A maximum of 5 PIRs may be used on 1 receiver.

Dimensions

Height: 105mm
Width: 66mm
Depth: 48mm

Features:

High RF Immunity
Low current consumption
Anti-tamper signal
12 Metre detection range
30m range between contact transmitter and receiver under normal conditions**
Pulse Count
Low Battery Signal

Technical Specifications

Colour	White
Voltage Supply	6V DC
Battery	AAA x4
Current Cons Op	4mA
Current C Stand By	40µA
Coding Method	Dip Switch /Solder Trace
Circuit	Saw Stabilized
Op Temp Range	-10 to +55C
Encoding/Decoding	10 Bit Binary
Mod Method	Pulse Burst Mod
Output Power	80µW Typical
Frequency	433.92 MHz
Code Combinations	1024
Sensitivity	N/A
No Of Channels	5 + Low Batt /Tamper
Output Type	N/A
Drive Capability	N/A

**Range The range of the detectors to the control panel will vary depending upon the building layout, construction of the building and thickness of walls. The orientation of the alarm panel and detectors can also affect the range. Find a place for the panel which is dry, as central to all transmitters as possible, as high as possible and away from sources of interference such as computers, televisions, electric motors, convection heaters, air conditioners and large metal objects that could shield the RF signal. It is recommended that, before both panel and transmitters are installed, a placement test be undertaken.