Scantronic 500r+ Class 3 Domestic Wirefree Alarm Panel - 433MHz

 

The 5 Series is a 9 zone wirefree alarm system, which can protect up to 8 potentially vulnerable areas of a building. The ninth zone if required can be programmed to be operated via personal attack and remote setting devices.

The Scantronic 5 Series eliminates the need for complex wiring between detection devices, making the product exceptionally easy to install and program, saving installation time and causing minimum disruption to your decor. The 5 Series also has 16 million different system codes to ensure your alarm does not suffer radio interference from adjacent properties.

Exceptionally easy to operate, this can be either from the on-board keypad on the 500r+ control panel, from any of the six 525r remote setting devices or from the 524r keypad. You can set the whole premises or part of the premises depending upon your particular requirements.

Suitable for your home, office or shop and with the addition of a 660 speech communicator, your premises can be monitored by family, friends, neighbours or company members, providing enhanced security to your 5 Series alarm system, and ensuring you peace of mind.

 

Panel Technical Specification

• Zones 9 wirefree (zone 9 pre-programmed as PA and for Remote Set/Unset)
• Zone Attributes Normal alarm, omit, entry/exit, entry route, fire
• Keypads On-board tactile rubber. Accepts up to 6 x 525r remote setting devices or a 524r remote keypad
• Display LED (Light Emitting Diode) indicators on control panel
• Part Setting Full and part set options via the onboard keypad, and via 6 x 525r remote setting devices or a 524r remote keypad
• Event Log 16 events recorded
• Expansion No
• Compliance BS 6799 "Class III" and BS 4737 (for Audible Systems). Radio approval DTI MPT 1340 and ETSI 300 220 (License exempt)
• Radio Sections Operating frequency 433Mhz at 200Khz band width. CE tested to ETS 300-683
• Panels Siren Yes (approx, 80db at 1 metre)
• Internal Sounder Accepts 1 x 9040 16 ohm loudspeaker (approx, 90db at 1 metre)
• External Bell/Strobe The panel can be connected to a self activated bell (SAB) using standard bell cable
• Codes 1, 4 digit user access code. 1,4 digit engineer code
• Jamming Detection Panel lights the jamming LED if it detects other radio signals on the same frequency. A full alarm is raised after 30 seconds
• Low Battery Indication Panel lights the Low Batt LED if it detects panel battery is low. If a detector reports a low battery the panel lights the Low Batt LED and appropriate zone LED
• Outputs OP1 and OP2 at 50mA maximum. OP1 signals burglar alarms, OP2 signals personal attack. These can be connected to a 660 Speech Communicator
• Quick Set Panel sets within 3 seconds, if the user presses Night on the 525r
• Certification The system can be certified by approved installers as a wirefree "Class III" installation by undertaking a radio site survey, using a 545r and 546r
• Bell Duration Programmable up to 20 minutes
• Entry/Exit Times Programmable between 0 to 99 seconds
• Battery 2.1Ah lead acid gel type rechargeable
• 12V Power Quiescent = 55mA
• Aux DC Power 500mA max at 12V
• Dimensions Control panel (HxWxD) = 163 x 257 x 74mm
• Weight Control panel = 1.2kg
• Temperature Range -10OC to +55OC
• Communications PA and Burg outputs

 

Typical Installation: 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scantronic Compatible Equipment

524r Remote keypad
525r Remote Set/Unset (Full & Part Set) unit +PA facility
502r Watch/Pendant panic alarm
509r Smoke detector
520r Radio Passive Infra Red 433MHz 90 degree
534r Vibration sensor
545r Radio Signal strength meter
536r Universal/door contact transmitter
660 4 channel wire in speech communicator
546r Test transmitter
9040 16 ohm loudspeaker/sounder

 

Please click this link for Scantronic user manuals