Texecom Radio Plus PIR

Texecom Radio Plus remote PIR for use in conjunction with the Texecom Radioplus Intelligent Receiver.  The PIR is designed to detect the movement of an intruder and activate an alarm control panel. 

• Each detector has its own unique factory pre-set identification code, selected from over 16 million combinations.
• The LED is disabled to increase battery life except in test mode.
• The detectors send approximately 12 supervision (monitoring) signals every 30 minutes.
• After a vaild alarm transmission the detector will not transmit an alarm again until there has been no movement for 2 minutes.  This increases battery life when the system is unset and there are people in the building.
• Battery life is up to 4 years, the detector will transmit a battery low warning when there is just over one months capacity remaining.  The battery should be replaced at this time (See associated products).

Dimensions
Height: 112.25mm
Width:  60mm
Depth:  40mm

Weight: 160g

Range: In free air up to 100m, walls and funiture will reduce this. 

Detector Standard   TS 50131-2-2 Grade 2 Environmental Class II
System Standard    Suggested use: within BS EN 50131-1 PD6662 : 2004 Grade2 system.
Wireless Standard Complies with EN 50131-5-3: 2005

Compatible
With Texecom Premier control panels; 48, 88, 168 & 640.  It is NOT compatible with the Texecom Premier 24.