Dimplex MFP Monterey Designer Style Panel Heaters

 

Dimplex Monterey designer style panel heaters.  Metal fronted with highly accurate electronic thermostat, pilot wire connectivity and rated at IPX4 splashproof suitable for bathroom and wet areas.

Features

Energy saving features

• Electronic thermostatic control, providing room temperature stability to +/-0.3^oC.
• Range of optional plug-in electronic timer modules, including:
  – 24 hour digital timer
  – Single-zone pilot wire programmer
  – Runback timer
• Compatible with Dimplex 4-zone, wall mounted pilot wire and mains borne signalling multi-heater programmers.

 

 

Other features

• Contemporary design.
• Convected heat for rapid warm up.
• Silent operation.
• Pre-set background temperature at 5^oC below thermostat setting.*
• Splash-proof (IPX4) rated, for use in bathroom or wet areas.
  
  * When connected to a programming unit supporting setback feature.

 

Dimensions

      

Model No.	Colour	Loading	Height	Width (A)	Depth (B)	X	X1	Weight
MFP050W	White	0.5kW	536mm	503mm	104mm	390mm	168.5mm	12kg
MFP075W	White	0.75kW	536mm	503mm	104mm	390mm	168.5mm	12kg
MFP100W	White	1.0kW	536mm	671mm	104mm	560mm	338.5mm	15kg
MFP150W	White	1.5kW	536mm	741mm	104mm	630mm	408.5mm	17.5kg
MFP200W	White	2.0kW	536mm	911mm	104mm	800mm	578.5mm	22kg

 

                

Technical Specification

Electronic Control

Dimplex Monterey electronic panel heaters feature highly accurate electronic thermostats, providing superior comfort and operating efficiency.

As the room temperature nears the desired set point, power to the elements is reduced, and the room temperature closely monitored to an accuracy of less than 0.3^oC, minimising overshoot and temperature drift, resulting in better energy-efficiency and user comfort.

Controls

1 Thermostat control
User selection of room temperature from 5^oC (frost protection) to 30^oC using slider control. Slider can be locked in position if required.

2 Power controls and indicators
Soft-touch on/off button, together with indicators showing when power to heating is on and when element is operating.

3 Plug-in control modules (optional)
A range of optional plug-in control modules, which can be removed from the heater for easy programming, provide the flexibility to meet a wide range of control specifications:

• 24-hour Digital Timer (RX24Ti)
  1 timer required per heater. Provides 24 hour programmable on/off control.
• Single Zone, Pilot Wire Programmer (RXPW1)
  Controls up to 10 slave heaters linked via pilot wire. Provides 7 day programmable on/off control.
• Runback Timer (RXRBTi)
  1 timer required per heater. Provides installer programmable runback time upto 4 hours (in 30 min increments.)
  Can be locked into heater.

 

Multi-zone Control	Compatible with Dimplex 4-zone pilot wire and mains borne signalling controllers. (RX9913 receivers required for MBS system)
Thermostat	Electronic type, accurate to +/- 0.3oC.
Element	Compact, finned, mineral-filled sheathed type, providing silent operation.
Thermal Cut-out	Auto reset type.
Construction	Durable epoxy-polyester powder coated steel casing, with upward facing grille. Temperature resistant PBT thermoplastic moulded parts.
Colour/Finish	White front, back, grille and plastic parts.
Installation	Detachable wall mounting bracket.
Electrical Connections	1.2m, 4 core cable (live, neutral, earth, pilot) supplied fitted to each heater.
IP Rating	Splashproof IPX4.