6w LED Driver - Constant Current

Light Fittings Indoor -> Aurora LED Drivers -> 6w LED Driver - Constant Current

Click for larger picture Download Data Sheet

Aurora 6w Constant Current LED Driver

Constant current LED driver for use with 350mA 1W LEDs. It has a 350mA Constant current output and is suitable for the supply of 1-6 1W LEDs.

Overload protection
Short-circuit protection
Thermal protection
1.0kV SURGE PROTECTION – EN 61547
Safety compliance - EN 61347
EMC compliance - EN 55015, EN 61000, EN 61547
Non-dimmable
3 Year guarantee

Please note:
DC output - Correct polarity must be observed in order for the the LED lamps to operate. LED lamps must be connected in series with the maximum length from the driverto the furthest lamp of 20m.

FAQs
Are your transformers approved to be used with Lutron dimming systems? Many are - Lutron offer a compatability listing of transformers for their different dimming systems. Please refer to Lutron.
What is the maximum distance I can put my LED downlight from the LED controller? 20 meters. When we say 20 meters - that refers to the cable length from the LED controller to the furthest LED lamp.

Can LEDs be Dimmed?

Yes however only 1w luxeon types/not multi chip.
This is only achievable with the Constant current dimmable driver plus 1 -10v dimmer. Part nos. AU-LEDD 16CC + AU-DSPLED

Do all LED Lamps need (transformer / Driver)?

No. Some are mains voltage driven whilst others require a controller (either constant voltage or constant current - please check).