Avo Megger MFT1552 17th Edition Multifunction Tester

 

 

■ PFC measurement on both loop test ranges

■ Selectable Fault (Touch) voltage 25 V or 50 V

■ Fault (Touch) voltage display

■ New Megger lead set included with all instruments

■ DC test functions for RCDs

All instruments test in accordance with International Standards and National Wiring Regulations including BS7671 (17th Edition wiring regulations) and European Standard EN61557.

In addition, the MFT1500 series also meets or exceeds the requirements of EN61010-1 Category III 480 V (max) phasephase.

The  MFT1552 has an automatic RCD test feature, the unique modern styling of the instruments allows it to be operated whilst stood on the floor, a ledge, hung around the neck with the supplied neck strap, or held in the hand.

The MFT1500 series uses the patented Megger digital/ analogue arc display. The analogue arc provides an indication of fluctuating readings, while the digital readout providing the ability to record accurate results. All test functions are selectable from the main panel, with no hidden ranges or functions to forget.

Special functions include:

VOLTAGE MEASUREMENT

■ AC/DC Volt meter provides a means of measuring the supply voltage independently of any other test functions, eliminating the need to carry a separate multimeter. Automatic selection of AC or DC measurement up to 500 V a.c./d.c.

■ 200 mA continuity from 0.01 Ω to 99.9 kΩ exceeds all current requirements for testing final ring circuit conductors, and bonding of services.

 

 

 

 

 

 

■ Automatic continuity testing commences the moment the test probes touch the circuit to be tested, allowing fast testing with both hands free.

 

■ Fast continuity buzzer is a fast buzzer tone, with no delay on each test for the buzzer to sound, saving valuable operator time. This test includes a fast safety check for the presence of a voltage as the test probes are connected to the circuit.

CONTINUITY TESTING

The MFT1500 series multifunction tester has been revised to include some additional new features:

Called the MFT1500 series, they retain all the essential features necessary for testing domestic, commercial and industrial fixed wiring, and now include the following: