Fluke 1577 & 1587 Insulation Multimeters

 

The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

 

Features	1587	1577
Insulation test voltages 50V, 100V, 250V, 500V, 1000V	•
Insulation test voltages 500V, 1000V		•
Insulation test: 0.01 MΩ to 2.0 GΩ	•
Insulation test: 0.1 MΩ to 600 MΩ		•
Auto discharge of capacitive voltage	•	•
Insulation test smoothing reading	•
Frequency	•
Capacitance	•
Diode test	•
Temperature	•
Min/Max	•
Low pass filter (for work on VSDs)	•
AC/DC Voltage	•	•
DC millivolts	•	•
AC/DC milliamps	•	•
Resistance (0.1 Ω to 50 MΩ)	•	•
Continuity	•	•
Three-year warranty	•	•
Remote probe, test leads, alligator clips	•	•
K-type thermocouple	•
Rugged, utility hard case	•	•
Auto power off to save battery power	•	•
True-rms	•	•
Large display with backlight	•	•
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection	•	•
CAT III 100V, CAT IV 600V measurement category	•	•
Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work	•	•

 

Specification

• Maximum voltage applied to any terminal: 1000 V ac rms or dc
• Storage temperature: -40 °C to 60 °C (-40 °F to 140 °F)
• Operating temperature: -20 °C to 55 °C (-4 °F to 131 °F)
• Temperature coefficient: 0.05 x (specified accuracy) per °C for temperatures < 18 °C or > 28 °C (< 64 °F or > 82 °F)
• Relative humidity, non-condensing: < °C
  0 % to 95 % @ 10 °C to 30 °C (50 °F to 86 °F)
  0 % to 75 % @ 30 °C to 40 °C (86 °F to 104 °F)
  0 % to 40 % @ 40 °C to 55 °C (104 °F to 131 °F)
• Vibration: Random, 2 g, 5-500 Hz per MIL-PRF-28800F,Class 2 instrument
• Shock: 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)
• Electromagnetic compatibility: In an RF field of 3 V/M, accuracy = specified accuracy except in temperature: specified accuracy ± 5 °C (9 °F). (EN 61326-1:1997)
• Safety: Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
• Certifications: CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard EN 61010 Part 1-1002
• Batteries: Four AA batteries (NEDA 15A or IEC LR6)
• Battery life: Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MW with a duty cycle of 5 seconds on and 25 seconds off
• Size: 5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L)
• Weight: 550 g (1.2 lb)
• IP rating: IP40
• Altitude (operating): 2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V
• Storage: 12,000 m
• Over-range capability: 110 % of range except for capacitance which is 1 %

• Compliance to EN 61557: IEC61557-1, IEC61557-2

   

For reference guides & user manuals please click this link to the Fluke website

 

Product Options