PRODUCT CATEGORIES

Varme Under Floor Mat Kit 1350w 9.0sqm no stat

Under Floor Electric Heating -> Varme Under Floor 150w Electric Mat Kits -> Varme Under Floor 150w Electric Mat Kits Without Thermostat -> Varme Under Floor Mat Kit 1350w 9.0sqm no stat

Varme Under Floor Mat Kit 1350w 9.0sqm no stat
 Code TPSM1350-S
 Make Varme
 Guarantee 10
 Price 1 £225.19
£258.97(inc. VAT)
 Quantity  
 
  Proceed to checkout

 

Varme under floor cable mat kits in a range of sizes from 150w up to 3450ws - No thermostat 

The Varme Mat system is similar to the Varme Cable, except that the cable comes already taped to a 50cm wide fibreglass mesh.

The main advantage with this design being that makes it much faster to lay out in larger open plan areas when compared to the cable system.

Varme Cable Mat

Varme Cable Makeup - Second to none!

Varme Mat 150 systems come in a standard 150w per sqm for all internal rooms.

See Varme Mat 200 for conservatories & other areas of high heat loss. 

Installation is simple, the mat is simply rolled out onto the existing sub-floor or insulation boards & when the opposite wall is reached the mesh is cut & the mat rolled back in the opposite direction.(see diagram >>)

When the mat is in place, the release paper on the double sided tape is peeled back & the mat is then pressed to the primed floor to hold it in place for tiling.

Room Layout Example

Varme Mat systems come complete with:

  • Heating cable supplied woven to a self adhesive mesh.
  • Floor primer.
  • Roller for primer.
  • Simple installation instructions.
  • Manufacturers Ten Year Warranty.

 

Varme Mat 150 (150w per square m)

Recommended for all internal rooms, will give approx 130watts per sqm at 85% room coverage.

Product Code
Output
(Watts)
Mat Length
Mat Width
Mat Coverage sqm
TPSM150-S
150w
2m
50cms
1.0 sqm
TPSM225-S
225w
3m
50cms
1.5 sqm
TPSM300-S
300w
4m
50cms
2.0 sqm
TPSM375-S
375w
5m
50cms
2.5 sqm
TPSM450-S
450w
6m
50cms
3.0 sqm
TPSM600-S
600w
8m
50cms
4.0 sqm
TPSM750-S
750w
10m
50cms
5.0 sqm
TPSM900-S
900w
12m
50cms
6.0 sqm
TPSM1050-S
1050w
14m
50cms
7.0 sqm
TPSM1200-S
1200w
16m
50cms
8.0 sqm
TPSM1350-S
1350w
18m
50cms
9.0 sqm
TPSM1500-S
1500w
20m
50cms
10.0 sqm
TPSM1650-S
1650w
22m
50cms
11.0 sqm
TPSM1800-S
1800w
24m
50cms
12.0 sqm
TPSM1950-S
1950w
14m+12m
50cms
13.0 sqm
TPSM2100-S
2100w
14m+14m
50cms
14.0 sqm
TPSM2250-S
2250w
14m+16m
50cms
15.0 sqm
TPSM2400-S
2400w
16m+16m
50cms
16.0 sqm
TPSM2550-S
2550w
16m+18m
50cms
17.0 sqm
TPSM2700-S
2700w
18m+18m
50cms
18.0 sqm
TPSM2850-S
2850w
22m+16m
50cms
19.0 sqm
TPSM3000-S
3000w
24m+16m
50cms
20.0 sqm
TPSM3150-S
3150w
24m+18m
50cms
21.0 sqm
TPSM3300-S
3300w
22m+22m
50cms
22.0 sqm
TPSM3450-S
3450w
22m+24m
50cms
23.0 sqm

 

Sizing a Cable Mat

 

Step 1: Take the length or width of the room and divide it by 0.55 (0.55 is the width of the mat plus 50mm).  It is spossible to run the mats in either direction, either length ways or width ways.

Step 2: Take the remaining room elvation measurement and subtract 0.10 (0.10 is 2 x 50mm clearance required at either end of the mat).

Step 3: Multiply the answer to step1 by step 2 to get the length of the cable mat. 

Step4: Divide the answer to step 3 by 2 to get the m² of the cable mat.

e.g.  A room 5.1m x 2.6m

1.  Take length of 5.1m and divide by .55 = 9.27, round down to 9 = no of runs of mat
2.  2.6m - 0.1m = 2.5m = maximum length of each run
3.  9m x 2.5m = 22.5m = total mat length
4.  22.5m divided by 2  = 11.25m² = maximum m² of the cable mat

 

The maximum amount of cable that can be fitted running the mat width ways (9 runs) is 11.25m².  If you try to calculate the amount of mat needed running the mat length ways the answer comes to 10m² with 4 runs which gives less coverage and less heat output.

 

Further Information

 

We have included a under floor heating buyers guide to show some of the different heating options available here and a list of the more popular questions that we have been asked here

ASSOCIATED PRODUCTS