Varme In Screed Cable Electric Underfloor Heating

 

20w per linear metre in-screed cable is designed to be installed in a concrete screed (usually 60-100mm)

The system is a primary heat source & can be used under almost any floor covering.

The output is varied by the cable spacing & usually ranges from 120-150w per sqm in a new build or extension, up to 200w per sqm in a conservatory, or where an off-peak solution is required.

This cable is also ideal for use directly below thick stone & flagstone type flooring.

In-screed cables are a low cost solution & are designed to be used where regular constant heat is required. Where irregular heating is needed (e.g. conservatory for ad-hoc use) we recommend the under-tile system with insulation boards (or an under wood/laminate carbon film system)

Advantages

•  High quality cable design
•  Low cost
•  Ideal for permanent heating of screed floors
•  Also suitable for de-icing driveways

 

The table below shows the range of cables available. Price includes heating cable, digital thermostat with floor sensor, VAT & delivery

Product Code	Output (Watts)	Cable Length	Room coverage @ 200w/m²	Room coverage @ 150w/m²
FHSC 400	400w	20m	2.0 sqm	2.7 sqm
FHSC 600	600w	30m	3.0 sqm	4.0 sqm
FHSC 800	800w	40m	4.0 sqm	5.3 sqm
FHSC 1000	1000w	50m	5.0 sqm	6.7 sqm
FHSC 1200	1200w	60m	6.0 sqm	8.0 sqm
FHSC 1400	1400w	70m	7.0 sqm	10.7 sqm
FHSC 1600	1600w	80m	8.0 sqm	11.3 sqm
FHSC 2000	2000w	100m	10.0 sqm	13.0 sqm
FHSC 2400	2400w	120m	12.0 sqm	16.0 sqm
FHSC 3000	3000w	150m	15.0 sqm	20.0 sqm

For larger areas than those detailed on the chart please contact us for further information.

 

Further Information

 

We have included a under floor heating buyers guide to show some of the different heating options available here and a list of the more popular questions that we have been asked here