Depron^® Insulation Sheets

 

Depron is one of the markets most efficient insulation materials.  The sheet gives the same insulation as 24mm thick pine, 100mm brick wall or 360mm of standard concrete - in just 3 millimetres!  A feature that makes it perfect as an insulation material on a floor.

What is Depron^®
Depron board is an extremely thin insulation sheet manufactured from fully recycled material, free from freon and halogen.  The sheet is produced from foamed polystyrene, a material that does not age. The cell structure in the sheet is built up of fine, closed cells that give it its excellent physical and mechanical characteristics.

An insultion capacity that saves energy
The special cell structure means that the sheet does not conduct heat.  Laying Depron^® on the floor means that heat will instead be effectively reflected back towards the floor surface.  As waste heat is taken care of, you utilise energy in an effective manner and thereby lower your energy consumption.

Effective protection against damp and cold
Depron^® not only takes care of the heat, it is also an effective guard against cold and damp.  The material is resistant to cement, plaster and alkalis, however, not against organic solvents.  Depron^® is water repellent therefore it does not rot or go mouldy.  In addition the sheets have a sound insulating effect which makes the floor quieter to walk on.

Depron^® Insulating Foam - The perfect solution for wood and laminate floors.

• Lightweight, just 40 gms per square metre.
• Moisture and mould resistant.
• Simple to install, it can be cut with an ordinary knife or scissors.
• Long lasting - it will not rot or decompose.
• It reduces noise - the sound insulating properties make the floor quieter to walk on.

 

Technical

2mm white	60 sheets 1250 x 800 (60m²)
3mm white	40 sheets 1000 x 700 (28m²)
6mm white	20 sheets 1000 x 700 (14m²)
3mm grey	40 sheets 1250 x 800 (40m²)
6mm grey	20 sheets 1250 x 800 (20m²)
U value	5.1 w/m²K
Thickness	3mm
Material type	Foamed polystyrene
Water repellent	100%
Density	40 g/m²
Thermal conductivity	0,035 w/mK
Temperature range	-60°c to +70°c
Ignition temperature	355°c
Step sound damping	^lw +16dB (DIN552210)
Adhesive	Water based adhesive without solvent

 

Further Information

 

We have included a under floor heating buyers guide to show some of the different heating options available here and a list of the more popular questions that we have been asked here