Scantronic 9448EUR-90 STYLE Hard Wired Alarm System

Alert description: Its been around for years, it is tried and tested, its got the Scantronic name on it.  If you are look for an entry level Scantronic burglar alarm panel ideal for smaller properties this is the ideal control panel.

Manufactrurers description

Scantronic have designed the 9448 series to meet the most professional alarm installation standards and yet have made the product easy to install, using simple but secure wiring.

Easy to operate, each system has full and part set facilities, the ability to change access codes and to connect additional remote keypads to give a high level of security and total peace of mind.

The 9448EUR-90 control panel has up to 7 zones of protection, day LED, 10 event log, 2 communication outputs (for speech dialler) and a programmable fire zone. A global anti-tamper zone has been incorporated together with provision for 3 outputs, bell, strobe, PIR set latch and shock sensor reset. The system can support 2 remote keypads.

Technical Specification

• Zones 7 closed circuit (zone 7 pre-programmed as entry/exit)
• Zone Attributes Personal attack, normal alarm, chime, omit, not used, part set omit, fire, entry route
• Panel 9448EUR-90 style = control panel with on-board tactile illuminated rubber keypad
• Keypads Accepts up to 2 remote 9427 Style keypads
• Display 10 LED (Light Emitting Diode) indicators on control panel, inc. day (unset) LED
• Anti-Tamper Circuits Global
• Event Log 10 events recorded
• Zone Expansion No
• Full/Part Set Fully programmable part set option
• Compliance BS 4737
• Panel Speaker Yes
• Internal/Extension Speaker 1 x 32 Ohm internal speaker, accepts 1 x 16 Ohm external speaker
• Outputs Bell and strobe 500mA open collector. 1 programmable 100mA as PIR set latch or shock sensor reset
• Bell Duration Programmable up to 20 minutes
• Entry/Exit Times 5 programmable entry and exit times
• Battery 2.1Ah lead acid gel type rechargeable
• 12V Power Quiescent - Panel = 55mA. Keypad = 20mA
• Aux DC Power 500mA @ 13.8v
• Dimensions Control panel (H x W x D) = 212 x 212 x 68mm. Keypad (H x W x D) = 115 x 115 x 28mm
• Weight Control panel 1.2kg
• Temperature Range -10°c to +55°c
• Communication Output Personal Attack (PA) and burg (for speech diallers only)
• Compatibles Control panel operates with most detectors, bells and sirens

Scantronic Compatible Equipment

9427-80 Remote Keypad
9040 16 Ohm Internal Speaker
660 Speech Communicator
420 PIR Detector
430 Pet Tolerant PIR Detector
440 Commercial Quad Detector
450 Ceiling mounted Twintec Detector
460 Twintec Detector
480 Commercial Twintec Detector

Please click this link for Scantronic user manuals

Please note, this control panel requires a lead acid back up battery, minimum 2.1ah see below, which should be purchased separately.

• ****Scantronic 7 zone alarm panel

  By Barrie Dickens on 24th Apr 2012

  Delivered as promised, installed it myself and it worked perfectly. Good value for money. As above, I have secured the battery with double-sided tape.

• ****Alarm panel

  By Peter Hornby on 23rd Apr 2012

  Bought to replace an old system. Easy to fit, good clear instructions. Very easy to follow programming instructions. Pleased with all functions this panel provides. Would recommend this product for a domestic install.

• ****Scantronic ,7 zone panel

  By George dobie on 12th Mar 2012

  Excellent value and ease of fitting. Just one negative comment be careful when opening the panel fronf cover as the battery tends to fall out, I rectified this by securing with double sided tape.

• ****9448eur90

  By Bob Foley on 02nd Mar 2012

  Brilliant budget alarm panel ideal for domestic installs. Good positive action on keypad, has all the usual features - EE, ER, NA, PA, chime etc etc. Easy install. Lasts for years.

• ****Scantronic 7 zone alarm panel

  By Ron Slater on 10th Jan 2012

  Easy replacement for old existing panel. Good instructions and diagrams, an excelent product at a fair price

• ****Scantronic 7 zone panel c/w on board keypad

  By ANDREW GREEN on 04th Oct 2011

  Replaced old control panel and works very well. Took approx. one hour to install by an engineer.

• ****Alarm system

  By J Michael Burgoyne on 24th Sep 2010

  A very well made security system. That can be installed by anyone with a basic knowledge of electronics

Submit a Review