Windsor MVHR Powered Heat Recovery Module For Smaller Commercial Applications

MVHR is a whole dwelling ventilation system that supplies & extracts air continuously at a low rate with the facility to be boosted as required meeting Part F System 4. 

The unit is normally installed in the loft space or cupboard and rigid ducting supplies fresh filtered air to the habitable rooms and extracts stale polluted air from the ‘wet rooms.  Supply and extract diffusers are fitted to the ceilings and can be adjusted so as to balance the system.  The unit incorporates a polymer heat exchanger that tempers the incoming air before it is delivered to the habitable rooms.  The efficiency of the exchanger can vary from 70% to 95% heat recovery. Background ventilators in windows are not required.

Features

• Powered heat recovery module for smaller commercial applications.
• Up to 70% heat recovery.
• With 150mm duct connection.
• Extremely quiet on low speeds.
• Low power consumption.
• Washable heat exchanger.
• Pre-wired to a flexible cable.

Technical Details

Dimensions

Accessories

At this time we recommend buying the ducting and grills from your local ventilation supplier, although we sell flexible ducting this is not recommended as it can restrict airflow over distance.  Spiral duct or semi flexible duct should be used.

Boost switch for temporary full power use.

Technical Information

For further technical information and specification please contact the Manrose technical departement, telephone: 01753 876908

Submit a Review