Intellisense FG1608T Glassbreak Detector And Magnetic Contact

The FG-1608T gives you two sensors in one for maximum versatility and performance. Instantaneously converts sound vibrations into mathematical sequences to accurately identify the signal pattern of breaking glass.

Features

Digital Signal Processing (DSP)
Microcontroller based technology instantaneously converts sound into digital mathematical sequences to accurately identify the signal pattern of breaking glass.

DSP Advantage
With DSP, the FG-1008 performs extensive analysis on signal variables including: flex/audio thresholds; ratios and durations; time coincidence; attack thresholds; and microphone overloads.

Indicator LEDs
Denote detection of sound events and alarm condition.

Alarm Memory
Alarm LED can be set to latch upon alarm; helps identify which FG-1008 alarmed in multiple detector applications.

Enclosed PC Board
The PCB is protected from potential damage during installation.

Remote Test Mode Enable and Disable
Can be tested remotely with the FG-701 Tester.

Test Mode Time Out
Automatically resets from test mode in 10 minutes.

Easy Installation and Set-up
Mount within 2.4m of the glass to be protected. No sensitivity adjustment required.

Power Up and Continuous Self Test
If any test fails, the unit will signal trouble by alternately flashing the indicator LEDs.

Dimensions

Glassbreak:
Height: 114mm
Width:  30mm
Depth:  23mm

Magnetic contact:
Height: 114mm
Width:  13mm
Depth:  23mm

Weight: 85g

Submit a Review