Autenco flush mounting ceiling PIR.  Rated at 4a 1000w, it is easily fitted to suspended or plasterboard ceilings. It is 2W resistive, suitable for most energy saving lamps, LEDs and emergency fittings.

The Autenco fl ush mounted PIR switch is suitable for easy mounting through a 73/75mm diameter hole into a ceiling void which is at least 95mm deep. Configurable for any room occupancy style, via Time and Lux level adjusters. It switches on the lighting load if the area is occupied and if the ambient lux level is less than the chosen adjusted level (10- to 1000 lux). It switches off the lighting load if the area is unoccupied for the set time (up to 40 minutes). It is also suitable for non lighting loads by setting the lux adjuster to the maximum point.

Specification

There is further information available on the attached data sheet.