Texecom Prestige Quad Element PIR Detector

Quad element digital PIR. Genuine quad detection provides additional stability for harsh environments.

Features Advanced Digital Microprocessor Design
The signal processing of the Prestige QD is performed by an advanced digital microprocessor. This device contains complex signal algorithms ensuring that only genuine alarm signals are detected. Ambient temperature is measured digitally, ensuring reliable detection performance even at high temperatures.  

Sealed Optics & Adjustable Mounting Height
The Prestige QD  is unique in that it contains sealed optics, yet has an adjustable mirror allowing mounting anywhere between 1.5m and 3.1m. Sealed optics prevents insects from entering the optical chamber, further improving false alarm immunity.  

Optional Tamper-proof Wall & Ceiling Bracket with Cable Feed-through
These provide two extra mounting options, enabling precise angle adjustment and ensure simple installation in any location, see below. 

15m Volumetric range  3 LED detection indication.

Specification

• Supply Voltage: 9 - 16VDC.
• Current Consumption: 10mA typical.
• Alarm Output: Built-in normally closed relay, open onalarm <24V< >DC 50mA, 18ohms.
• Dimensions: 112mm x 60mm x 40mm.
• Packed Weight: 180g (approximately).
• EMC: Independently certified to EN50130-4 : 1996.
• Design: Microcontroller based signal analysis.
• RF Immunity: No false alarms from 80MHz to 1GHz at 30V/m.

European Standards

Conforms to European Union (EU) Electro-Magnetic Compatibility (EMC) Directive 89/336/EEC (amended by 92/31/EEC and 93/68/EEC).   Approved to BS EN 55022 Class B and BS EN 50130-4 : 1996.

If an optional ceiling or wall mounting bracket is required please click Texecom Prestige Mounting Bracket.

• ****Prestige quad element pir

  By Paul Gravely on 18th Jul 2011

  Excellent well constructed detector offering ease of installation and reliable

• ****Pir sensor

  By Jerry Ponzi on 14th Jul 2011

  Hello Dear, I am looking at your Prestige IR sensor and Texacom Dialler, I feel like this is what I require for a customer's requirements project. Actually, the job consist of connecting a PIR sensor to a camera and that should trigger an alarm (or send an SMS) to a mobile phone at remote side. What do you suggest, What will be the total and what items do I need to add to perform this? And finally, how all this will connect? Best Regards, Jerry CCTV Installer

• ****Texecom prestige pir

  By Mark Roberts on 25th Feb 2011

  These are great detectors but remember they need to be fitted at 1.8mtrs to work correctly or they miss the lower half of the room.

Submit a Review