Texecom Odyssey 1E Single Piezo Bellbox Screenprinted Alert 

The Texecom Odyssey 1E bellbox is single piezo external sounder complete with back up battery and integrated strobe warning light. This version is screeprinted with Alert on for that professionally installed look.

Specification
Height         318mm
Width          201mm
Depth          66.5mm
Weight         850g
Volume        109db
Material       3mm Polycarbonate

Approvals
EN50131-1 Grade 1 & 2
Environmental Class IV - Outdoor general

• ****Texecom odyssey 1e bellbox

  By John M. Cooper on 03rd Apr 2012

  I am a competent DIY person, but not an electrician,so when the 5 wire box arrived to replace my 6 wire system, I was flummoxed. The maker's helpline was hard to understand, but I found a wiring schematic on the internet.

  I have now fitted the product, and would like to say that I find it well made, very good value, and a good update. But shortly after fitting, the strobe started self activating and I am at a total loss to know why. The LEDs on the bellbox are flashing correctly, and of course I have checked my wiring. The strobe wire is now disconnected at the Strobe -ve terminal on my Omnicron 7000 processor, and without expert diagnosis, have to conclude that there is a compatibility problem.

  So, this is very disappointing, but at least I have a good value deterrent which looks good and the sounder works properly. Excellent service from Alert Electrical, but system compatibility could be better emphasized in the product description, at least to help DIY people like me.

  ALERT REPLY:   Hi John, thank you for your review. The control panel you have is a very old A1 panel without a non volatile memory. I would suggest that your next upgrade might be a Texecom V8C or VR8 control panel which will avoid any compatibility issues. I hope that helps.

• ****Texecom bellbox

  By Stephen Chamberlain on 30th Jan 2012

  Alert is a very good at it's job, very fast and prompt service as usual. As an electrician who also installs alarms I either use ADE or Texecom products. But which ever control panel I use, I alway install Texecom bellboxes as the ADE Reson8 bellbox is rubbish. I fitted 2 Reson8 bellboxes for a customer and had to replace them both for Texecom. Reason you cannot see the LED's flashing in the Reson8 bellbox - even at nighttime.

• ****Diy

  By James mckiernan on 01st Oct 2010

  easy to install along with the texecom control panel should be no problems for a good diyer

Submit a Review