Alert Electrical Limited

Dimplex 4 zone Programmers (Compatible with Monterey. Girona, Saletto, EPX, RPX, Duoheat and Apollo)

Dimplex 4-zone wall mounted programmers provide the flexibility of complete system control from the convenience of a single point.Each zone in the system can be individually configured with a custom 7 day time programme, allowing complete flexibility over system design. RXPW4 and RXMBS4 wall mounted programmers are compatible with EPX, EVS, RPX, Calidou and Apollo ranges of electronic panel heaters and DuoHeat radiators.energy-efficient electric heating.

Read More

CodeRXPW4

From: £40.52

£48.624 inc. VAT


Dimplex 4 zone Programmers (Compatible with Monterey. Girona, Saletto, EPX, RPX, Duoheat and Apollo)
 Click to Enlarge
Option PriceQty. 
RXPW4 4 zone 7 day programmer (RXPW4) £86.64
£103.97 inc. VAT
Out of stock Contact Us
RXMBSF4 Mains Filter (Req if using RXMBS4 with DuoHeat Radiators - 1 per installation) (RXMBSF4) £69.69
£83.63 inc. VAT
Less Qty.More Qty. Add to Cart
RXMBS4 4 zone 7 day Mains Borne Programmer (RXMBS4) £122.85
£147.42 inc. VAT
Less Qty.More Qty. Add to Cart
Mains Borne Receiver For Duoheat Radiator (1 per heater) (RX03002) £40.52
£48.62 inc. VAT
Less Qty.More Qty. Add to Cart
Download Data Sheet
Brand

Dimplex 4 zone Programmers

(Compatible with Monterey. Girona, Saletto, EPX, RPX, Duoheat and Apollo) 

RXPW4N 4 zone Pilot Wire Connection 7 Day Programmer

Please note this has replaced the RXPW4 and now has a new mounting case and will not retro fit the old version.

Pilot wire installations utilise an additional control wire linked between each heater. This is a 240V live conductor, carrying a low current signal to activate the various modes on the heater electronic control. Up to 20 heaters per zone can be supported (dependent on controller).

This system is ideal for new build applications as the pilot wire can be installed with the first fix wiring. As heaters require no additional receivers, this offers a cost-effective means of central control.

Features

  • Controls with Monterey, Girona, EPX, RPX, LPP, Apollo, Q-Rad and DuoHeat ranges.
  • Wall mounted, mains powered units.
  • Pilot wire connection.
  • 4 zones, each with separate customisable user programme for each day of the week.
  • Installer configurable option to allow switching between Comfort/Setback modes, Comfort/Off modes or Comfort/Frost protection modes.
  • Manual programme over-ride facility, with automatic return to programme at next timed change.
  • Continuous Comfort, Setback, Frost protection and Off modes*.
  • RXPW4N pilot wire programmer can be used with RXPWIF interface unit to control ancillary appliances, such as towel rails or hot water system.

 

RXPW4 and RXMBS4 4-zone wall mounted programmers

 

Provides the flexibility of complete system control from the convenience of a single point. Each zone can be individually configured with a custom 7 day time programme.

Features

  • Wall mounted, mains powered units
  • Installer configurable option to allow switching between comfort/setback modes, comfort/off modes or comfort/frost protection modes
  • Manual programme override facility, with automatic return to programme at next timed change
  • Continuous comfort, setback, frost protection and off modes*
  • Holiday (time absence) mode
  • Easy to install and configure
  • RXPW4 pilot wire programmer can be used with RXPWIF interface unit to control ancillary appliances, such as towel rails or hot water systems
  • Compatible with Monterey, Girona, Saletto, EPX, RPX, Apollo and DuoHeat radiator

Note: For mains borne signalling option, RX9913 receiver cassettes are required for each panel heater or RX03002 for each DuoHeat radiator.

An RXMBSF mains filter is also required.

Note: Pilot wire installations are appropriate for single phase connection only.

* Off mode not applicable for DuoHeat.

These are the programmers, each heater then needs a suitable receiver;

For the RXPW4 Pilot wire programmer use the RX9911

And for the RXMBS Mains borne programmer use the RX9913

  • ****Heating controller

    By D Bannister on 02nd Jul 2013

    Easy to use ordering system. Correspondance was excellent and delivered within on time.

RXPW4 4 zone 7 day programmer RXPW4 4 zone 7 day programmer
5 1
Dimplex 4-zone wall mounted programmers provide the flexibility of complete system control from the convenience of a single point.Each zone in the system can be individually configured with a custom 7 day time programme, allowing complete flexibility over system design. RXPW4 and RXMBS4 wall mounted programmers are compatible with EPX, EVS, RPX, Calidou and Apollo ranges of electronic panel heaters and DuoHeat radiators.energy-efficient electric heating.
Heating controller
4 4
Easy to use ordering system. Correspondance was excellent and delivered within on time.

Product Categories

Heating

All enquiries please contact via live chat 9am - 4pm Monday to Friday support@support.alertelectrical.com please include your order number (Starts W201..)

© Copyright 2016 Alert Electrical Limited. Unit 2/3 Clarendon Court | Manners Industrial Estate | Ilkeston | Derbyshire | DE7 8EFTop