Windsor MVHR  Heat Recovery Module For Single Intake And Extract Applications

MVHR is a whole dwelling ventilation system that supplies & extracts air continuously at a low rate with the facility to be boosted as required meeting Part F System 4. 

The unit is normally installed in the loft space or cupboard and rigid ducting supplies fresh filtered air to the habitable rooms and extracts stale polluted air from the ‘wet rooms.  Supply and extract diffusers are fitted to the ceilings and can be adjusted so as to balance the system.  The unit incorporates a polymer heat exchanger that tempers the incoming air before it is delivered to the habitable rooms.  The efficiency of the exchanger can vary from 70% to 95% heat recovery. Background ventilators in windows are not required.

Features

• Controls condensation and odours - saves energy.
• Eliminates mould growth.
• 70% Heat Recovery.
• Extremely quiet operation.

Technical Details

Dimensions

Accessories

At this time we recommend buying the ducting and grills from your local ventilation supplier, although we sell flexible ducting this is not recommended as it can restrict airflow over distance.  Spiral duct or semi flexible duct should be used.

Boost switch for temporary full power use.

Technical Information

For further technical information and specification please contact the Manrose technical departement, telephone: 01753 876908

• ****Windsor 100mm in line heat recovery module

  By John Rhymer on 20th Apr 2011

  Item arrived with inlet flange bent. Must have taken a battering in transit or at warehouse (it was quite thick steel). However my installer managed to straighten it sufficiently to get a good seal for the hose. Everything looked ok inside so they went ahead with install. Unit failed on first day. Electrician has tested and found a break in motor coil wiring. We are returning the unit for replacement. ALERT RESPONSE: Please accept our apologies, we will try to get the faulty item swapped around as soon as possible.

Submit a Review