Depron® Insulation Sheets
Depron is one of the markets most efficient insulation materials. The sheet gives the same insulation as 24mm thick pine, 100mm brick wall or 360mm of standard concrete - in just 3 millimetres! A feature that makes it perfect as an insulation material on a floor.
What is Depron®
Depron board is an extremely thin insulation sheet manufactured from fully recycled material, free from freon and halogen. The sheet is produced from foamed polystyrene, a material that does not age. The cell structure in the sheet is built up of fine, closed cells that give it its excellent physical and mechanical characteristics.
An insultion capacity that saves energy
The special cell structure means that the sheet does not conduct heat. Laying Depron® on the floor means that heat will instead be effectively reflected back towards the floor surface. As waste heat is taken care of, you utilise energy in an effective manner and thereby lower your energy consumption.
Effective protection against damp and cold
Depron® not only takes care of the heat, it is also an effective guard against cold and damp. The material is resistant to cement, plaster and alkalis, however, not against organic solvents. Depron® is water repellent therefore it does not rot or go mouldy. In addition the sheets have a sound insulating effect which makes the floor quieter to walk on.
Depron® Insulating Foam - The perfect solution for wood and laminate floors.
- Lightweight, just 40 gms per square metre.
- Moisture and mould resistant.
- Simple to install, it can be cut with an ordinary knife or scissors.
- Long lasting - it will not rot or decompose.
- It reduces noise - the sound insulating properties make the floor quieter to walk on.
2mm white 60 sheets 1250 x 800 (60m²) 3mm white 40 sheets 1000 x 700 (28m²) 6mm white 20 sheets 1000 x 700 (14m²) 3mm grey 40 sheets 1250 x 800 (40m²) 6mm grey 20 sheets 1250 x 800 (20m²) U value 5.1 w/m²K Thickness 3mm Material type Foamed polystyrene Water repellent 100% Density 40 g/m² Thermal conductivity 0,035 w/mK Temperature range -60°c to +70°c Ignition temperature 355°c Step sound damping ^lw +16dB (DIN552210) Adhesive Water based adhesive without solvent