BG Evolve Matt Black Intelligent Trailing Edge Double Master Touch Dimmer Switch | PCDMBTDM2B

SKU: PCDMBTDM2B

Evolve Intelligent trailing edge dimmers have a lower minimum load than leading edge dimmers, offering greater compatibility for LED, Halogen, CFL and incandescent lamps.

£152.40 £127.00

BG Evolve Matt Black Intelligent Trailing Edge Double Master Touch Dimmer Switch | PCDMBTDM2B

Evolve Intelligent trailing edge dimmers have a lower minimum load than leading edge dimmers, offering greater compatibility for LED, Halogen, CFL and incandescent lamps. The soft start brings the lights to a set level in around 1 second and extends the life of lamps

Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers, and will turn the lights down or off until the load is corrected

Designed with a slim, screwless profile, this comprehensive range offers a complete solution for any domestic or commercial application.

Features

  • Intelligent trailing edge dimmers have a lower minimum load than leading edge dimmers, offering greater compatibility for LED, Halogen, CFL and incandescent lamps
  • Soft start brings the lights to a set level in around 1 second and extends the life of lamps
  • Overload protection prevents failure if you mistakenly connect your dimmer to too many lights or transformers, and will turn the lights down or off until the load is corrected
  • Smooth dimming control
  • Silent operation - no noise when dimming
  • Support for lower wattage lamps eliminates flicker
  • Touch dimmer control
  • Captive backed out terminal screws prevent screw loss
  • Manufactured to BS EN 60669-2-1
  • 3 x 1mm² 2 x 1.5mm² & 1 x 2.5mm²
  • Minimum mounting box depth – 25mm

Load Rating (Max/Min per module)

  • Dimmable LED 5-100W
  • Tungsten/Incandescent 5-200W
  • Halogen 20-200W
  • Dimmable Compact Fluorescent (CFL) 5-100W

Installation Note

  • Master can only be used in a one way switching circuit where one switch controls a light (or circuit) i.e. on or off.
  • For two way switching, where a light (or circuit) is controlled by two switches, the master touch dimmer must be used with a secondary touch dimmer at the secondary location.
  • A master touch dimmer cannot be used in combination with a traditional light switch or any other dimmer switch.

 

 

Loading...