Customer service available: 9am - 4pm Monday to Friday Call Us now
More Contact Info

Click Smart Dimming Actuator/Receiver 160W Max RFDEL-71B

Click Smart Dimming Actuator/Receiver 160W Max RFDEL-71B

Availability: In stock

The Click Smart Dimming Actuator/Receiver Will dim up to 160W of most dimmable LED's, CFLi's, mains and low-voltage halogen lights with a dimmable transformer as well as standard tungsten filament.
SKU: RFDEL-71B
**On Order with Click Scolmore. Delivery Within 3-5 Working Days**
From £81.88 Incl. Tax: £98.26
Description

Click Smart Dimming Actuator/Receiver 160W Max RFDEL-71B

The Click Smart Dimming Actuator/Receiver Will dim up to 160W of most dimmable LED's, CFLi's, mains and low-voltage halogen lights with a dimmable transformer as well as standard tungsten filament. The Dimming Actuator/Receiver has a Load selection control for LED sources, either LED or capacitive load can be selected providing a higher percentage of compatibility.

The Smart Dimming Actuator/Receiver has 7 programmable functions: 6 various dimming functions plus ON/OFF

Features

  • Will dim up to 160W of most dimmable LED's, CFLi's, mains and low-voltage halogen lights with a dimmable transformer as well as standard tungsten filament.
  • Load selection control. For LED sources, either LED or capacitive load can be selected providing a higher percentage of compatibility.
  • Facility to use a retractive/momentary switched input. The receiver can then be controlled by a further 31 smart switch transmitters
  • Rotary 'trim' control gives adjustment so the lights can remain slightly ON and also erradicate flickering which may occur at the bottom end of dimming
  • 7 programmable functions: 6 various dimming functions plus ON/OFF
  • Easy operation: short press will turn the light ON or OFF, a long press dims the lights UP or DOWN to the required level
  • Electronic over-voltage protection - switches off the output when the dimmer is overloaded or open circuit
  • The programming is performed by using the button 'PROG' which also acts as a manual override

Technical Specification

Supply voltage230V AC / 50Hz
Apparent consumption:1.1 VA
Dissipated power:0.8W
Tolerance of supply voltage:9.85
Connection:4-wire with “NEUTRAL“
Resistive load:160W
Capacitive load:160W
Inductive load:160W
Packet from transmitter:868 MHz
Manual control:PROG (ON/OFF), external button
Range in open space:Up to 160M
Operational temperature:-20 °C to +35 °C
Operational position: Any
Mounting:35mm deep enclosure (plastic)
Protection degree:IP 30
Overvoltage category:III.
Pollution level:2
Output wires:4 x 0.75 mm2
Output wire length:90 mm
Dimensions:49 x 49 x 21 mm
Weight:40g
Applying standards:EN60730-1 ED.2