Fire Angel Thermoptek Battery Smoke Alarm Smart RF Ready | FS2126-T
The Fire Angel Thermoptek Battery Smoke Alarm is an optical smoke alarm that works using the light scatter principle of as smoke enters the optical chamber, its particales cause the infr-red light to be scattered onto a photodiode light receptor. Once light hits the receptor a signal is sent to the interfrated circuit causing an alarm to sound alerting occupants of recognisded fire.
The Fire Angel Thermoptek technology combines the lastest in optical sensing with a thermal enhancement making Thermoptek the smoke alarm technology of choice for the UK Fire & Rescure Services.
Smoke Alarm Positioning: Bedroom | Living room | Hallway | Landing
Smart RF Ready: Add a Smart RF Module to interlink with SM-SN-1 Mains Smoke FS1226-T Heat, HM-SN-1 Mains Heat, FS1326-T Carbon Monoxide, FS1552W2-T Vibrating Alarms and FS1524W2-T Control Unit
- Features Thermoptek - our best sensing technology
- Suitable for Grade F1 installations (BS 5839-6)
- Diagnostic functionality monitors alarm activations and fault finding
- Smart RF Ready
- 10 year sealed for life battery
- 5 year warranty
- Intelligent alarm status monitoring - without intrusive standby LED
- Remote, automated reporting of alarm sounder status via FireAngel Connect
- Locate feature - silence all but initiating alarm in network
- Create a Network of up to 50 Smart RF Alarms & Devices
What Is Thermoptek?
Thermoptek technology combines the very latest in optical sensing with thermal enhancement, providing fast reaction to both slow smouldering and fast flaming fires in a single alarm. The technology constantly monitors for temperature changes and if a rate of temperature rise is detected the sensitivity of the alarm is increased, providing a quicker response time to both fire types.This technology completely removes the confusion between fitting ionisation or optical technology around a home, making the initial specification and purchase choice a much easier one. Thermoptek™ is significantly less likely to produce nuisance alarms, which is so often the reason for people disabling detectors.If in the event of an alarm being activated the “intelligent silence” feature (enabled by pressing the test/reset button on any alarm in the network) will silence all but the initiating alarm.
This product has not been reviewed yet.