Knightsbridge IP65 6W LED Fire Rated CCT Change Downlight RW6CCT
An integrated IP65 6w LED Dimmable fire-rated downlight, complete with an interchangeable white bezel and with a Colour Selectable integral LED light source, enabling warm white, cool white or daylight white from your wall switch. Push fit terminals, Loop in/Loop out for ease of installation with integral driver. Tested to 30, 60 and 90 minutes fire-rated.
- White colour temperature selectable, warm white (3000K) cool white (4000K) daylight (5000K)
- High Lumen output
- Alternative Bezel finishes available to purchase separately
- 40º Beam Angle
- To change the colour temperature of the fitting, switch the fitting on, off and on again within 2 seconds. Repeat this switching cycle until desired colour temperature has been achieved.
- Please see the Instruction Manual attached, for Reset Function and Memory Function
- Overall Height 74mm
- Diameter 85mm
- Minimum Void 121mm
- Cut-Out diameter 72mm
Given that the bathroom is a special location within the wiring regulations its always best to have the electrician agree what fittings are suitable before purchase. The electrician will have to be satisfied that they meet both the Zone requirements and manufacturer’s instructions for the fitting in the desired location along with checking for any changes to the supply to the room.