LightSymphony PIR Motion Sensor LS30070PIR
The’Wireless PIR’ unit is a mains powered device that uses a long-range wireless transmitter to trigger Light Symphony Lighting Control Modules. The PIR is adjustable for on times of between 1 and 15 minutes and the ambient light level is also easily set using the external adjustment. When triggered, the unit is factory pre-set to transmit the command; “ALL AREAS ON”, which will switch the whole garden on. The PIR can easily be re-programmed to trigger a specific Area or zone from 1 to 29 using the internal DIP Switches. This feature allows multiple PIRs to be used together to control different lighting circuits or groups.
The transmit range of the unit is up to 1,000 metres line-of-sight but this will be reduced by walls and other obstacles. In all cases, it is strongly recommended that a range-test be carried out before final installation. If additional range is required a Base-Station or Repeater unit may be installed, these units echo the commands transmitted by the PIR thereby extending its range.
- IP 55
- Adjustable 1 - 15 minutes
- 1000 meter range
- Does not over-ride user's control
- Adjustable sensitivity
- Mains powered
- Adjustable both horizontally and vertically
A remote control (model LS30050WRC) is required for programming as a PIR cannot be programmed manually or using the APP/keyfob.