Hyco Powerflow Unvented Multipoint Water Heaters
The Hyco Powerflow Series of unvented electric water heaters offers the ideal solution to all your light industrial, commercial and domestic hot water requirements. The Powerflow operates at the same mains pressure as the incoming cold water supply. This provides a good supply of hot water at mains pressure (average 3 bar). It also negates the need for a header tank giving more flexibility for siting and installing the unit.
Ideal for a wide range of commercial applications, cafes, canteens, small industrial units and light domestic situations dependant on unit size.
• Stainless steel tank
• Regulation thermostat adjustable to 65°C
• Unvented Accessory kit supplied with every unit
• Building Regulations and CE approval
MODEL PF30L PF50L PF90L Maximum water pressure to pressure reducing valve 12 bar Power (kW) 3.0 Voltage (V) 230V~50Hz Current (A) 13A Capacity (Litres) 30 50 90 Operating Pressure 3 bar Expansion vessel charge pressure 3 bar Expansion relief valve setting 6 bar Pressure reducing valve setting 3 bar Temperature and pressure relief 7 Bar 90 degrees C Minimum recommended pressure 0.8 bar Immersion heater specification Hyco PFEL30EN60335x 1 Weight empty (kg) 9 13 24 Weight full (kg) 39 63 114 Heat up time (from 13°C to 60°C) in minutes 21 40 86 Reheat time (70% contents to 60°C) in minutes 16.5 28 57 Height (mm) 620 915 930 Width (mm) 380 380 540 Depth (mm) 295 295 385 Tank Material Stainless steel Inlet / outlet connection 1/2" BSP male