Texecom Connect SmartCom Ethernet and Wifi Intelligent Communicator CEL-0001
The Texecom Connect SmartCom V2.00 Ethernet and Wifi Intelligent Communicator is a new generation of simple connectivity for customers with cloud technologies. The Texecom Connect SmartCom will take the Premier Elite product line into the future and enable customers to transition their systems. The Texecom Connect SmartCom Ethernet and Wifi Intelligent Communicator can be connected to any Premier Elite panel with an upgrade to Version 5.0 firmware.
The Texecom Connect SmartCom is powered from the panel and can be installed adjacent to the panel. The unit is connected via two COM ports, to enable Texecom Connect App connectivity, ARC reporting and UDL support from Wintex.
**Please Note The Texecom Connect App requires the use of the SmartCom and is not compatible with other communicators**
- Ethernet and Wifi (2.4Ghz)
- DHCP addressing
- Remote connection without port forwarding
- Uses Texecom Cloud service
- Easy integration with Premier Elite V5.0 firmware
- Compatible with Wintex for remote configuration
- Compatible with future cloud systems management
- Simple user web page for wifi configuration
- Secure - no need to open firewalls for port forwarding
The Texecom Connect SmartCom Ethernet and Wifi Intelligent Communicator is compatible with Premier Elite panels up to the Premier Elite 168, with V5.00 firmware. The Texecom Connect SmartCom is supplied as a separate module that is connected to two COM ports within the panel. A cable is supplied for this purpose. We know that COM ports are used for other reasons and therefore we have also included the COM port expander, this enables the installer to create another COM port from the Expander header on the PCB.
Texecom Connect With WiFi Setup
It is recommended that the use of COM1 and COM2 for the SmartCom, but other ports can be used if either of these are already in use.