Sangamo Choice 3 Channel Heating & Hot Water Programmer PR3N
The Sangamo Choice PR3n is a 3 channel programmer that offers three completely independent time controlled channels. The Choice PR3n is ideal for control of 2 individual heating zones and separate hot water control.
The Choice PR3n multi-channel capabilities enables installers to comply with Part L (Part J in Scotland and Part F in Northern Ireland) of the amended Building Regulations for dwellings over 150m² by providing separate time and heating control for living and sleeping areas whilst also providing timed control of hot water.
The Sangamo Choice PR3n programmer can be configured for 24 hour, 5/2 day or 7 day operation, and the flexibility of up to three on/off timings per day.
- 24 hour, 5/2 day and 7 day selectable
- 2 or 3 ON/OFF periods selectable
- 1, 2 or 3 hour boost
- Advance to next programmed event
- Automatic Summer/Winter time change
- Standard wall plate - simple plug in and replace
- Pumped system
- Comply with Part L of the Building Regulations
||230V AC, 50Hz
||0°C to 40°C
||230V AC, 2(1)Amp (per channel)
||1B , Micro-Disconnection
||Lithium Cell CR2032
||Thermoplastic, flame retardant
||For fixed wiring only
||140mm x 87mm x 37mm
|BST/GMT time change:
||24hr, 5/2day or 7day selectable.
|Program On/offs per day:
||2on/off, 3on/off selectable
||1, 2 or 3 hour, Advance
EN60730-1, EN60730-2.7, EMC Directive2004/108/EC, LVD Directive 2006/95/EC
How to set the program times on a Sangamo Choice PR3n. For further assistance in using Sangamo products you can call us on 01475 747 511.