GJD Dygizone Multifunction 4 Zone Controller Satin Silver GJD910
The DygiZone controller provides intelligent security lighting control which enhances security and saves energy. PLEASE NOTE, This controller requires the 4 zone, GJD040 please see 'You may also be interested in' at the bottom of the page.
Precise 24 hour control and monitoring of 4 zones of security lighting via a user-friendly control panel and modern LCD display.
Programmable functions that accurately control the activation, timing and duration of the lighting to minimise energy consumption and light pollution.
Any one of 5 mode settings can be programmed for each zone.
When the external GJD sensors are activated, the DygiZone indicates which Zone has been activated by either an audible beep or a 10 second pre-recordable voice message - and the Zone indicator is illuminated on the control panel.
2 programmable timers for each zone allows the lighting to be automatically switched on & off at pre-set periods for a pre-set time - ideal for when a building or premises are unoccupied.
A system overide can be made from up to 3 locations at any time.
The system can be expanded to enable up to a 30,000 Watts of lighting to be controlled and switched as required.
134 ( W ) x 87 ( H ) x 30 ( D ) mm
12 VDC @ 20 mA standby. 100 mA triggered with message playback.
Back lit blue LCD display showing real time clock, detector activation and zone status.
Internal warning tone. Individual tones for each zone or selectable 10 second voice recordable message for each zone.
Four individual zone buttons for selecting zone status and programming options.
Normally 1 Master and 1 Slave DygiZone. One additional Slave can be added if required. Requires GJD Expansion Units.
Two individual on/off timers per zone.
Indoor use only. Mount in a clean dry location. Can be mounted on a standard single or double flush backbox.